#4 HSS Spiral Flute Taper Pin Reamer Contiguous 48 US States Part Number DWTMR2-30X2

Part Number DWTMR2-30X2

the slots hold the drivers with consistent spacing and keep them from rolling around in a drawer • Patent Pending • Low Profile for Shallow Drawers – At 1

Wrench Size: 7/8"

• Lock Rails Into Tray – Lock 13 inch rails into the tray and release them by pressing the button beside the keyhole latch and sliding the rail out • Stand Upright in Drawer – The tray securely holds socket rails in an upright position

#4 HSS Spiral Flute Taper Pin Reamer Contiguous 48 US States Part Number DWTMR2-30X2Product Description Tapered reamers turn a straight hole into a tapered hole into which standard taper pins will fit. The straight flute and spiral flute reamers are generally used by hand while the helical flute is designed for machine use. The square on the shanks of the straight and spiral fluted are suitable for holding in a tap wrench or vise. The straight flute taper pin reamer is recommended for most materials. The spiral flute taper pin reamer