Tengu Mask (STL File) STL Printing orientation should be such

Printing orientation should be such that the engravings should be facing straight up

At some point I'll design some wings to go with these too

Support touching only the build plate should be fine

and it is designed to be two parts that get attached together with adjustable straps for easier removal (it gets hot in there)

Tengu Mask (STL File) STL Printing orientation should be such(STL FILES ARE FOR 3D PRINTING, NOT A PHYSICAL ITEM) Hey! Here's the STL File(s) for the Japanese Tengu Mask that I recently made for myself. The different painted designs like the scars are modeled into the surface, making it really easy to paint once the 3D print is done. Settings: I would recommend 3D printing it with the nose pointing upwards. I used a gyroid infill structure at 5% infill density and tree supports to get a strong print with a